SW- A Soft Sinker Stick in a soluble tube that reacts quickly and has an excellent foaming agent that is enhanced by incoming gases.

FS- is a hard stick that floats at the oil/gas interface and produces foam longer.

AS- Acid Sticks are water soluble containing a combination of acid, disperant, Iron Sequestrate foamer which removes and diperses carbonate scale, FeSulfide, FeOxides, and can lower water ph to prevent scale and enhance foaming.

OFS- is a hard oil foam stick which has an excellent foamer for wells that are trying to load up with mostly condensate.

OF/SW- is a soft stick that is 50% SW and 50% OFS. These sticks are recommended when you have approximately 25% condensate and 75% water.

QAS/QCP- is a hard stick with a bacteria retardant and a surfactant that reduces surface tension. QAS has multiple uses such as dropping in vessels, SWD systems, tubing, to inhibit fluids where packer is in place, etc. also contains a corrosion inhibitor (in stick or pellet form).

CFS- Corrosion foam stick is a soft stick in a water soluble tube which contains a filming amine quat that helps with corrosion protection of metal surfaces while also being a good foamer.

CS- Corrosion stick is a hard inhibitor stick that contains a blend of
imidazolines which have excellent filming characteristics and low emulsion tendencies. CS sticks are available in water soluble and oil soluble formulations.

NAC- is a hard stick used to help keep sodium chloride and other salts from precipitating out and plugging the tubing and casing.

DBS- Drill bit sticks are hard water soluble sticks that are condensate dispersable containing a combination of surfactants and friction reducers which will perform in fresh or salt water. These sticks are an economical way to increase the drilling efficiency and life of the drill bits.

DSS- Drilling sweep sticks are hard type sticks. DSS sticks help increase the drilling returns efficiency. The powder sticks come in soluble tubes.

CIP-18- Corrosion Pellets with a bacteria retardant, surfactant and reduces surface tension - excellent to inhibit fluids where packer is in place.